The rule of thumb
A typical full-size fridge needs about 54 W on average. Divide your usable battery energy by that and you get hours. Usable is the catch. After the losses we apply, each 500 Wh of nameplate capacity gives about 6 hours of fridge:
| Nameplate | About how long |
|---|---|
| 500 Wh | 6 h |
| 1,000 Wh | 12 h |
| 2,000 Wh | 24 h |
| 3,000 Wh | 35.5 h |
These use a 12 W inverter idle draw, which is typical for the units in our dataset. The table at the bottom shows each model with its own idle draw.
Where the hours go
Start with 1,000 Wh on the label.
- Usable depth, 90%. Plan on 900 Wh, not 1,000. Most makers let you use nearly all of it. We leave a margin.
- Inverter efficiency, 85%. The fridge’s 54.2 W costs about 63.8 W from the battery, because converting DC to AC wastes energy.
- Idle draw, about 12 W. The inverter burns power just by being on.
That is 900 Wh divided by 75.8 W, or about 11.9 hours. Ignore the second and third lines and you would promise 16.6 hours, which is how many runtime claims end up optimistic.
What changes the answer
- A hotter room. A fridge in a warm garage works harder. The calculator has a switch that adds 25%. That 25% is our assumption, not a measured figure.
- Opening the door. Every open lets cold air out. We do not model it.
- A bigger or older fridge. Our 54.2 W figure is a typical modern full-size unit and has medium confidence. Measure yours with a plug-in watt meter for 24 hours and enter the number in the calculator.
- A full freezer or ice maker. Both raise the average.
Does it start?
Runtime is only half the question. If the inverter cannot start the compressor, the hours do not matter. Read will a power station start my fridge.