DRAFT, not published. Awaiting owner review. Search engines are told not to index this build. Check each figure's date and confidence flag.
EssentialWatts
Affiliate disclosure: some links on this site may earn us a commission at no cost to you. Details.

Updated 2026-11-21 (draft)

Sizing a power station for a CPAP

A CPAP without a humidifier needs about 45 W on our figures. Confirm the real number on your device, and read the medical note below.

Run these numbers with your own appliancesOpens the planner preloaded with: Refrigerator, 24 hours. Change any watt or hour figure.

Medical note

This is a planning aid, not medical advice. Confirm your device’s power draw on its label and with your doctor or supplier. Do not use a portable power station as the only power for oxygen concentrators, ventilators or any life-support equipment. If you depend on powered medical equipment, ask your provider about a medical-grade backup.

The figures

Our dataset uses 45 W average and 104 W at start for a CPAP without a humidifier, from a third-party source, with medium confidence. The 104 W figure includes the humidifier. A heated humidifier can add a lot, and heated tubing adds more. Your device’s label or manual lists the real number.

For one 8-hour night at 45 W that is 360 Wh before losses. With 85% inverter efficiency, 12 W idle draw over the 8 hours the inverter runs, and 90% usable depth, you need about 580 Wh per night. A 500 Wh unit is just short of one night. A 1,000 Wh unit covers about 1.7 nights. Two nights needs about 1,160 Wh.

Run it from DC if you can

Some CPAP machines can run from 12 V DC directly, which skips the inverter loss and the inverter’s idle draw. Check your device for a DC adapter, and use the maker’s cable.

Use the calculator

Switch on “CPAP” in the calculator, set hours to 8, and change the watts to your device’s label. The calculator also shows a medical notice when CPAP is selected.

Related

Sources