The surprise: the inverter costs more than the router
A home router and modem together draw about 10 W. We list that figure as medium confidence and editable, because it depends on your gear. At the battery, with 85% inverter efficiency, that is about 11.8 W.
Now add the power station’s own idle draw. Our dataset lists 5.5 W to 34 W depending on the model, most between 10 and 18 W. For a unit with a 12 W idle draw, the inverter uses more energy than the router does. A 1,000 Wh unit gives you roughly 900 Wh usable and about 24 W total drain, so about 38 hours of internet and nothing else.
Two lessons follow. A larger unit mostly buys you more days of internet, not a better connection. And if the only thing you power is a router, a small DC-powered backup built for routers wastes less than a general-purpose power station. We do not cover those here.
UPS switchover
A router or modem that loses power for even a moment reboots, and cable and fiber gear can take minutes to come back. If you plug it into a power station that is itself plugged into the wall, a unit with UPS mode switches to battery when the grid fails.
The figure to look for is the switchover time in milliseconds. Makers publish it, and our dataset lists it where they do. Bluetti’s manual for the Elite 200 V2, for instance, says it switches to battery within 15 ms and adds that the feature is not meant for servers or workstations that need high-performance UPS. Treat any such feature as best effort for a router, and test it: pull the wall plug while the router runs and see whether it reboots.
Where the table below shows no UPS time, the maker publishes none we could find. Without it, plan on the router rebooting when the power goes out.
Running it only during outages
If you do not need the router until the power fails, you can switch the inverter on only when you need it and save the idle draw. The trade-off is that the router restarts and takes a few minutes to reconnect. The calculator has an inverter-always-on switch so you can see both cases.
What we have not measured
Our router figure is a typical value, not a measurement of any specific router. Fiber terminals, mesh nodes and cable modems vary. Put your own numbers in the calculator.